Two grid power

Power Equipment Of Two Grids

ZGS13-H combined transformer (American transformer)

Product overview:

The whole ZGS13-H combined transformer (American Transformer) is characterized by small volume, simple installation and maintenance, low noise, low loss, anti-theft, full protection, and strong overload capacity. It is applicable to new residential areas, green belts, parks, stations, hotels, construction sites, airports and other places. ZGS13-H combined transformer (American transformer) is applicable to 10kV loop network power supply, dual power supply or terminal power supply system as a power transformation, metering, compensation control and protection device. This product complies with the following standards: GB17467 HV/LV Prefabricated Substation DL/T537 Guide Book for Selection of HV/LV Prefabricated Substation.

Product model description

Combined transformer (American transformer)

Design No.

Rated Voltage

Main switch type of high-voltage switchgear: F-load switch; F. R-load switch + fuse

Type of operating mechanism for high-voltage switchgear: T-spring operating mechanism; S-manual mechanism

Rated capacity of transformer (kVA)


Service environment

● Altitude: no more than 1000m;
● Ambient temperature: - 35℃~+40℃;
● Relative humidity: daily average value is not more than 95%, and monthly average value is not more than 90%;
● Installation site: no fire, explosion hazard, chemical corrosive gas and well ventilated site, and the ground inclination is not more than 3°;
Note: When ordering this product beyond the above conditions, please consult with our company.

Technical parameter​

No. Name

Unit

Parameter
1 Rated Voltage kV

10/4 (HV/LV)​

2

Maximum operating voltage​

kV

12 (high voltage side)​

3

Rated frequency

Hz 50
4

Rated capacity​

kVA 50-1600
5

1 minute power frequency withstand voltage​

kV 35
6 Lightning impulse Voltage kV 75
7

Cooling mode​

 

Oil immersed self cooling​

8

Breaking current of high voltage backup fuse​

kA 50
9

Breaking current of plug-in fuse​

kA 25
10

Ambient temperature​

-35~+40
11

Allowable temperature rise of coil​

65
12

No-load voltage regulation​

  ±5%±2x2.5%
13

Noise level​

db 50
14

Degree of protection​

  IP43


Installation dimension drawing



Ordering Instructions
Product operation site and special requirements:
1. The product ordering drawing should be provided. The ordering drawing shall include the wiring diagram, and shall indicate the transformer capacity, model and specification of main components, distribution branch circuit and capacity; 
2. When it is necessary to configure electric energy metering and reactive power automatic compensation devices, the configuration requirements of metering watt-hour meters and transformers shall be provided, and the capacity of compensation capacitors shall be indicated;
3. The requirements for product surface treatment should be indicated;
4. When ordering the combined transformer, please indicate the terminal type or ring network type.

Contact Information
Zhejiang Changzheng Electric Co., Ltd.
Address:No.159, Wei 16 Road, Yueqing EconomicDevelopment Zone, Yueqing City, Zhejiang Province
Service hotline:400-826-9123
website:www.changzheng.com.cn